Canon PIXMA MG2120 Wireless Setup. My Image Garden For Mac OS X 10.5: 1.0.0: Download: Canon PIXMA MG2120 series IJ Printer Driver for Linux (rpm Packagearchive). Canon PIXMA MG2120 Driver, Software and Setup Download For Windows, Mac, Linux – Do you have a problem when printing your paper, brochure, pamphlet, or your photo? Canon printer has presented PIXMA MG2120 to solve your problem.
Wireless/Wifi/WPS Connection set-up Guide For canon pixma mg2120
Before we start, there are however some conditions that must be met in order to use the WPS pushbutton method:
The access point must have a physical WPS push button available, please check with your device’s user guide for details.
Ur network must be using the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points will not connect using the WPS method if the WEP (Wired Equivalent Privacy) security method is used, or if no security is enabled. For details on which security method is being used on your wire-less network, please check the wire-less connection settings on your computer.
Please follow the steps below to complete the set-up.
Make sure the wire-less router is in range of the printer & the WPS button is ready to be pressed.
–>–>–>Step to 2
Press & hold the (Wireless) button (A) on the printer until the wire-less lamp (B) flashes.
–>–>–>Step to 3
Press the (Wireless) button until the Direct lamp (D) lights up.
–>–>–>Step to 5
Press the (Colour) button, & make sure that the ON lamp (E) & the wire-less lamp flash, then press the (WPS) button on the wire-less router within 2 minutes. The blue WiFi lamp on the printer will continue to flash while searching, & the Power & WiFi lamps will flash when connecting to the access point.
–>–>–>Step to 6
When the printer has successfully made a connection to your wire-less network, the Power & WiFi lamps will stop flashing & remain lit. The network lamp will also light up.
For exact details regarding pressing the WPS button, please refer to the access point manual.
Network settings confirmation
To confirm that your printer is successfully connected to your wire-less network, u can print out the network settings of your printer if u wish:
Make sure that your printer is turned on.
Load a sheet of A4 or Letter-sized plain paper.
Press & hold the (Wi-Fi) until the WiFi lamp flashes once, & then release it.
Press the (Colour)
Press the (Wi-Fi)
Press the (Colour)
When referring to the printout, check that “Connection” indicates “Active” & that the SSID -Service Set Identifier (the name of your wire-less network) indicates the correct name of your wire-less network.
This concludes the WPS set-up procedure.
If u do not have the CD(’s) that came with your product, or u’re a Mac user, please Download the software on Site.
Standard Connection Method (For Windows & Mac users only)
If your access point does not support the WPS feature, use the following instructions to set your printer up on your wire-less network:
For Windows users, insert the CD that came with your printer & runs the setup.
If u do not have a CD drive, or you’re a Mac user, then please download the software.
Connection for Windows Users Only
–>–>–>Step to 1
Double-click on the downloaded .exe file to open the following screen & click (Start Setup).
–>–>–>Step to 2
The software will check to see if there are any updates to the driver & software. This may take a few minutes to complete.
–>–>–>Step to 3
If u accept the terms of the license agreement, click (Yes).
–>–>–>Step to 5
If u would like to take part in the extended survey program, click (Agree).
Ensure (Deactivate the block) is checked & click (Next) .
–>–>–>Step to 7
The following screen will be displayed for a few seconds.
–>–>–>Step to 8
Ensure that your printer is powered on & click (Next).
–>–>–>Step to 10
The software will search for any printers already set up on your network.
–>–>–>Step to 11
If u have already connected your printer to your network, select it from the list & click (Next) to start the software installation, then proceed to.
–>–>–>Step to 16 .
If u cannot see your printer listed, continue to –>–>–>Step to 12.
–>–>–>Step to 12
If this is the first time you’re setting up your printer, it will not be displayed in the list.
Ensure (Set up the network connection according to the guide) is selected & click (Next).
–>–>–>Step to 13
The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.
Please follow the on-screen instructions carefully to prepare your printer for connection.
Only click next, when your printer corresponds with the example shown in the diagrams below –
–>–>–>Step to 14
Once u have made the necessary settings on your printer, the software will now temporarily disconnect your computer from your wire-less network & connect directly to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.
–>–>–>Step to 15
When the connection is established, click (Next) to continue with the software installation.
–>–>–>Step to 16
The printer driver software will now install & register onto your computer. This will take a few minutes to complete.
–>–>–>Step to 17
If this is the first time u’re setting up your printer, it’s recommended to perform the print head alignment. Click (Execute) to start the process & follow the on-screen instructions.
If u have already aligned the print head, click (Next).
–>–>–>Step to 18
Once successfully printed, click (Next).
–>–>–>Step to 19
Click (Next) to see a list of optional software u can also install.
–>–>–>Step to 20
20 From the list select any additional software u wish to install & click (Next).
–>–>–>Step to 21
Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click on (Instructions) to find out more information on setting up your device, or click (Next) to continue.
–>–>–>Step to 22
To register your printer, click (Next) (this will open in a web browser).
Click (Exit) to finish the installation.
Connection For Mac users only
–>–>–>Step to 1
Double-click on the downloaded .dmg file to open the following screen.
Double-click on the (Setup) icon to start the setup. If the following screen appears, click (Open).
–>–>–>Step to 2
When the following screen appears, type your Password to allow the Helper Tool to be installed, then click on (Install Helper).
–>–>–>Step to 3
The software will check to see if there are any updates to the driver & software & download them as necessary.
–>–>–>Step to 5
If u accept the terms of the license agreement, click (Yes).
–>–>–>Step to 7
If u would like to take part in the extended survey program, click (Agree), otherwise click (Do not agree).
–>–>–>Step to 8
If your printer has already been connected to your wire-less network, u will see the following screen. Click (Yes) to continue with the installation & jump to –>–>–>Step to 17 . If your printer has not yet been connected please continue to –>–>–>Step to 10.
–>–>–>Step to 10
If your printer has not yet been connected to your wire-less network, u will see the following screen. Select wire-less LAN Connection, then click (Next).
–>–>–>Step to 11
Ensure that your printer is powered on & click (Next).
–>–>–>Step to 12
The software will search for any printers already set up on your network.
–>–>–>Step to 13
If this is the first time u’re setting up your printer, it will not be displayed on the list.
Ensure (Set up the network connection according to the guide) is selected & click (Next) .
–>–>–>Step to 14
The set-up guide will open & guide u through connecting your printer to your network using the easy wire-less connect process.
Please follow the on-screen instructions carefully to prepare your printer for connection.
Only click next, when the printer corresponds with the example shown in the diagrams below.
–>–>–>Step to 15
The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.
When the following message is displayed, click (Allow).
–>–>–>Step to 16
When the connection has successfully completed, click (Next).
–>–>–>Step to 17
The printer driver software will now install on to your computer.
The software will now temporarily disconnect your computer from your wire-less network & directly connect to your printer to configure the network settings.
Ur computer will re-connect to your wire-less network automatically once this has completed.
If the following message is displayed, click (Allow).
–>–>–>Step to 19
Select Canon ‘MG/MX/TS/MP series’ ‘Bonjour Multifunction’ from the list & click (Add) .
–>–>–>Step to 21
After adding your printer, the set-up screen may be hidden by the web browser. If this happens, click on the set-up icon set-up located in the dock, to display the screen again.
Once the printer has been added, click (Next) to continue.
–>–>–>Step to 22
If this is the first time u’re setting up your printer, it’s recommended to perform print head alignment. Click (Execute) to start the process & follow the on-screen instructions.
If u have already aligned the print head, click (Next).
–>–>–>Step to 23
Click (Start) to perform a test print & click (Print) .
The set-up of your printer is now complete.
Click (Next), to see a list of optional software u can also install.
–>–>–>Step to 25
From the list select any additional software u wish to install & click (Next).
–>–>–>Step to 26
Once the additional software has installed, u will see a message informing u about setting up your smartphone or tablet. Click (Instructions) to find out more information on setting up your device, or click (Next) to continue.
–>–>–>Step to 27
To register your printer, click (Next) (this will open in a web browser). Alternatively, click (Skip).
–>–>–>Step to 28
Once the additional software has installed, click (Exit) to finish the installation.
Restoring your printer’s network settings back to factory default
Restoring your printer’s network settings back to factory default. If u need to reset your network settings back to factory default, for example, if u change your access point, u can do so by following these instructions:
Please note that initialization erases all network settings on the machine, so printing or scanning from a computer over the network will become impossible until the printer is re-configured with new network settings.
–>–>–>Step to 1
Press & hold the (RESUME/CANCEL) button until the ALARM lamp flashes 19 times.
–>–>–>Step to 2
The network settings have been reset back to factory default settings.
Please now refer to the WiFi set-up – (WPS or Standard Connection methods) for instructions on setting up your printer onto your WiFi network.
How to Scan canon pixma mg2120
The Windows Fax & Scan utility enables u to scan doc & pictures. Before u can scan doc & pictures u must have a scanner installed on your computer. Your scanner must be listed in the Devices section of the Devices & Printers Control Panel window.
To check to see if your scanner is properly installed open the Device Stage. Choose Start→Devices & Printers. If Windows doesn’t automatically find your scanner u can manually add it in the Devices & Printers window by clicking the Add a Device button in the toolbar & following the wizard’s commands.
Choose Start→All Programs→Windows Fax & Scan.
Click the Scan button in the Navigation pane then click the New Scan button on the toolbar.
Use the settings on the right to describe your scan.
By letting the computer know what you’re scanning its color profile & the type of file u plan to create u enable Windows Fax & Scan to create the highest quality scan.
–>–>–>Step to 4
Click the Preview button to see what your doc will look like.
If you’re happy with the preview click the Scan button.
Windows scans the document & presents u with an image of your document.
–>–>–>Step to
Click the Save As button & complete the necessary information.
Enter the filename the type of graphics file u want to be saved & then click the Save button.
To automatically forward the document u have just scanned as an attachment to a new fax message click the Forward as Fax button.
The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.
The scan feature in the Windows Fax & Scan utility is set primarily to scan text documents. If u want to scan a photograph or other graphic you’re better off doing that directly within the Windows Live Photo Gallery.
Canon Pixma MG2120 Wireless Setup, Ij Setup Driver Download – The PIXMA MG2120 Color All-In-One Inkjet Photo Printer from Canon delivers color prints in 4.8 ppm and black in 8.4 ppm. The printer utilizes Canon’s FINE ink technology to supply photo-quality printing directly from your computer. Borderless photos can be printed in standard photo sizes from 4.0 x 6.0″ up to 8.5 x 11.0″. For files, the printer can handle up to legal-size pages. The included Easy WebPrint EX utility makes it effortless to print just what you desire from the internet without wasting paper. The utility allows you collect segments from multiple web pages and then rearrange them before printing. The printer utilizes a 2-cartridge ink system, making it effortless to maintain and replace your ink cartridges. The built-in flatbed scanner provides the capability to scan both photos and files. The auto scan mode detects whether you’re scanning a photo or a record. Should a photograph need to be corrected, only use the Auto Photo Fix II to make sure your scanned photographs look their best. The scanner software also enables you to use filter effects like fish attention, miniature, and toy camera into your photos. You may even use the software to extract a single frame from an HD picture clip and print it as an image.
Depending on how much and exactly what you print, the 70 (as of 03/07/2012), USB-attached Canon Pixma MG2120 color inkjet multifunction printer could possibly be adequate for a house user. But its black ink is hardly a bargain, so if you print mostly text, you won’t like the continuing costs. On the flip side, in the event that you normally print blended text and color images, this MFP prices about the same to operate as most of the competition.
The Pixma MG2120 will manage low volumes of printing, copying, and scanning readily. Unsurprisingly, given the price, it has no conveniences such as an automatic duplexer, or an automatic document feeder (ADF) for your scanner. On the plus side, the lid for your letter/A4-size scanner telescopes to accommodate thicker material, and you may even push-scan by changing a setting from the scanner conversation. The single input tray handles about 100 sheets, and the output tray directly above it manages 50.
The control panel is rudimentary. The single-digit LED and array of flashing-light indicators can be difficult to decipher, despite some good labeling. There aren’t any media-card slots, nor is there a display for navigating menus or previewing photos.
Canon, unlike HP with its Photosmart 5010, supplies a full-featured PC printer driver. The unit has the regular panoply of design choices like booklet and”n-up,” or tiled, webpages (multiple webpages decreased in size and printed on a single sheet of paper).
Mac users, though, will be disappointed: You’ll find no manual duplexing support for your Mac, and Canon’s solution for encouraging Lion (OS X 10.7) would be to send me into a website where I could find no download specifically for your Pixma MG2120, just those for more expensive models. Fortunately, Apple’s own Insert Printer setup found, downloaded, and set up a suitable driver to the unit.
The output from the Pixma MG2120 is fast considering the price and its planned low-volume usage. Text prints at roughly 5.8 pages per second on the PC, and 5.7 ppm on the Mac; 4-by-6-inch photos print at 2.4 ppm on plain paper and at roughly half that rate on glossy photo paper. The full-page photo we print from the Mac requires somewhat less than 4 minutes, or 0.3 ppm–a bit slower than the standard.
Text isn’t laserlike, but certainly serviceable, even for company correspondence. Color images have a warm, friendly vibe. They’re not terribly accurate in terms of their color palette, skewing orangeish even on Canon’s own photograph paper. They do, however, show nice detail.
The Pixma MG2120’s black ink is more expensive no matter which size of cartridge you purchase. The PG-240XL Extra Large black cartridge costs $21 and lasts for 300 pages, which can be a costly 7 cents per page (cpp). The $38, 600-page PG-240XXL black cartridge is just marginally cheaper at 6.3 cpp. The tri-color CL-241XL price $30 and continues for 400 webpages, or 7.5 cpp.
Canon offers only a 90-day warranty on the Pixma MG2120. Before finding that, I would have estimated that the building of the unit would have it lasting much longer than three months. However, Canon’s brief commitment to the device ought to be noted.
Should you print in reduced quantity –a few pages a few times a week, or an occasional photo–the economics of this Pixma MG2120 might do the job for you. For more frequent use, opt for something a bit pricier with better black-ink costs, such as the Brother MFC-J430W or the Epson Stylus NX430. Both these units also carry a more reassuring one-piece guarantee.
Speed & Quality Terrific Resolution This level of quality is accomplished by 4800 x 1200 maximum color dpi thanks to Canon Full-photolithography Inkjet Nozzle Engineering (FINE) with a patented print head firing ink droplets as small as two pl. This delivers superb detail and quality in both your business documents and photographs
Both of these genuine Canon ink cartridges contain specially formulated inks for good document and photo quality. One is a Black cartridge for crisp text and one is a multi-color cartridge for amazing photographs. Both are Simple to use and substitute Print Beautiful, Borderless Photos, Quickly
ChromaLife100 This system combines improved FINE print head technology with choose genuine Canon inks and then choose genuine Canon photo papers for amazing borderless photos that can last up to 100 years when stored in an archival-quality photo album
Ease of Use Full HD Movie Print software turns HD film clips captured with your compatible Canon EOS Digital SLR or PowerShot cameras to beautiful photo prints Fun Filter Effects
Fast Front A new, convenient way to load your PIXMA printer with genuine Canon FINE ink cartridges and paper so you are ready to print as quickly as ever Easy-WebPrint EX Easily collect and unite multiple web pages to create and print your own layout
Auto Photo Fix II This built-in technology automatically categorizes your images into one of five types – Portrait, Scenery, Night Scenery, Snapshot with Scenery, and Snapshot with Night Scenery – subsequently applies optimal image and multi-zone vulnerability correction. So, unexposed areas of the photo will be optimized, area by area and faces that are backlit and under-exposed will automatically be brightened with proper color cast to make sure more accurate skin tones for gorgeous images
Auto Document Fix Auto Document Fix delivers beautiful, easy-to-view scans by innovative image analysis and area-by-area data correction, automatically. So, your document can be darkened with pronounced advantages for clear, sharp text that’s easy to browse, and images can maintain color contrast and tone
Auto Scan Mode Automatically recognizes the Kind of being scanned, then scans and saves together with the appropriate settings
Quick Start After pressing the power button it is possible to begin inputting commands in mere seconds. So, full performance is possible in a much shorter time
Connectivity Hi-Speed USB Plug the cable into your PC for a super-fast connection for your data transfers
In order to establish a wireless connection between Canon Printer and other external devices, it is necessary to create the right configuration. This cannot be neglected, but first, you need to learn about the hub. It is known as an access point. The Certain access point is programmed with automatic connection that is called WPS. It lets the compatible devices (Conon Printer) to connect into the network. By using WPS, it means that there is no need to input password to connect your printer into the network. This is the simplest method because you only need to turn on the Wi-Fi and then select the available network connection. Therefore, please select WPS connection if the hub that you use has this option. However, there are several requirements in order to use the WPS push button:
First, you need to check the hub manual book. You need to know whether the hub supports WPS button or not. If it does not, you cannot follow this push button guide.
Check the available network that is about to be used. It has to be WPA or it could be WPA2. This protocol is available in most of the hubs in the market.
After you get information about the availability of WPA or WPA2 in your access, you can start to set the following wireless configuration:
Turn on the Canon PIXMA printer
Press the Wireless button and hold it. Do not release the button until you see the indicator light gives a signal. It will blink once.
Near the Wireless button, there is an indicator lamp. When the lamp shows blue light, you need to hold the WPS button on the access point for 2 minutes.
After that, you will notice that the Wireless indicator lamp will keep blinking. It means that the printer is trying to find the available network nearby.
Wait until the power and Wireless indicator lamp blink at the same time. During this process, the printer has already found the access point and it tries to establish network connection.
If the printer has been connected to the available network, the wireless and power indicator lamp will no longer giving signal. It will stop to blink.
This guide only works with hubs or router that supports WPS protocol. If you are not able to establish wireless connection using this guide, there are several factors that prevent it. First, the type of your access point. Second, the routers or hubs that you use need custom configuration before it is ready to be utilized as WPS access point. The last factor, there is no enough signal, so the printer cannot detect or connect to the network. It is important to check the speed of the network as well.
Well, if you follow the guide correctly, your Canon PIXMA printer can be used immediately. However, it is necessary to test the printer whether is already connected or not. By using this simple test, you can check the wireless connectivity of the printer:
Prepare Plain Paper (Note: it could be Letter or A4 paper size)
Turn the Canon PIXMA printer on
Put the Plain Paper into Input Tray
Find the Resume button and hold it
The indicator lamp next to Resume button will blink for fifteen times
Make sure you count it correctly and then release the Resume button
At last, Canon PIXMA will print the network information on the inserted plain paper
Take paper and look for SSID. It should display the name of the used network. Make sure that it is printed correctly. canon Pixma MG2120 ij setup
By performing this network confirmation print, you can double-check the wireless connection of the printer.
How to Scan Canon Pixma MG2120:
Install MP Navigator EX soft-ware located on the disc that came with the printer. If’you do not have thedisc, you can obtain the soft-ware on the Canon web-site,
Open the top of the scanner & place the document u wish to scan on the glass,
Set preferences on the screen as needed,
Select the Scan button when ready,
The Canon Pixma should start the scanning process. When it is finished, select Save-to-save the document ‘s’ as a (JPEG), or select Save-as (PDF) to save it in (PDF) format.
Canon MG2120 Ink Cartridges:
Canon Printer Mg2120 Download
PG-540 black.
PG-540XL Black high-cap.
CL-541 color.
CL-541XL color high-cap.
PG-540XL/CL-541XL multipack ink Cartridges.
PG-540/CL-541 multipack ink Cartridges.
Download Canon Mg2120 Installation Software
Canon Pixma MG2120 Driver, User Manual & Software Download
Canon Pixma MG2120 CUPS Driver [Mac Os X] Download
Canon Pixma MG2120 Scanner Driver [Mac Os X] Download
Canon Pixma MG2120 User Manual [Mac Os X] Download
Canon Pixma MG2120 User Manual [Windows] Download
How to Install and Uninstall Your Canon Printer Drivers:
For some people, installing and uninstalling printer driver on computers can be a headache. This article will explain about the steps to install and uninstall your Canon printer drivers. Before installing the printer, there are several things that is important to be considered, such as:
Quit all running applications
Log in as the administrator and do not change users during the installation
A Canon PIXMA printer usually comes with a CD driver. But there are many times when you have to install a printer driver without the CD driver. In this case, you have to download the latest printer driver from Canon’s website to solve the issue. The steps to install the printer driver are listed below:
Verify your printer’s make and model.
Visit Canon’s website and search for the latest printer driver and download it.
Extract the downloaded files to a new folder.
Connect your printer via USB cable.
Open Control Panel, and double-click the Printers or Printers and Fax icon.
A new window will occur, then choose to Add a printer icon.
A Windows Printer Wizard will appear, then click Next to start the wizard.
There will be choices of installing a Local or Network printer. Choose Local printer attached to this printer, then click Next.
A prompt for printer driver’s location will appear. Choose the directory of your driver.
After the installation is finished, test your printer to make sure it’s working.
Canon Pixma Mg2120 Setup
As for the uninstallation, the steps are described below:
Canon Pixma Mg2120 Printer Manual
Choose Programs or All Programs from the Start menu.
Choose the Canon printer driver, then click Uninstall from the menu that appears.
When the confirmation prompt occurs, choose OK or Execute.
If the printer does not occur in the Programs menu, use the following steps:
Canon Pixma Mg2120 Driver Download
Select the Start menu, find Devices and Printers.
Click the printer to delete, then press Alt.
On the File menu, click Remove device and wait until the icon is gone.
Find any remaining icons in Printers and Faxes and click.
Click Print server properties on the command bar, then click the Drivers tab.
Click the Change Driver Settings button
When the User Account Control dialog box occur, click Yes.
Choose the printer driver you are willing to uninstall and click remove.
Remove Driver and Package dialog box will be displayed, then choose remove driver and driver package, then click OK.
In the confirmation dialog box, click Yes.
When data collection is completed in the Remove Driver Package dialog box, click Delete.
